Compartment Heaters Of Marine Engines : A Perfect Protection Cover

Posted by Admin | Marine Engines | Thursday 10 March 2011 6:43 am

In the places of world with extreme climates like Georgia and California, many people suffer boat engine damage because of freeze. For this purpose, there is need of compartment heaters for marine engines. These are primarily designed to meet needs of the boat owners round the year; and are mounted above the compartment of the engine. In the critical areas, the key role of these engines is to keep the temperature above the freezing point.

The Compartment Heater Placement

These engines can be mounted in the permanent manner or can be placed on temporary basis during the months of winter. When lacing heater in temporary manner, it is very important to consider the aspect of security. Make sure there is no accumulation of water; also be cautious of its fall on the moving parts of engine. For some specific models, there are some mounting brackets available. Although specially designed, these are temporarily installed. The prime function of their installation is the security aspect as far as the mounting of bilge heater is concerned. One can remove it later with safety catch flick.

The Problem and a Solution

One can wonder why the light bulb or any source of heat cannot be used to make the area warm. The reason being this can lead to a serious fire hazard. Many marine associations have particular rules against such usage. Besides this, these are considered as sources of low standard and do no possess the genuine features related to the safety aspects. This becomes more dangerous because the compartments of the engines may contain fuel vapors that are explosive.

Compartment Heaters – Special Designing

These are specially designed to operate under cold conditions. These also meet the strict guidelines as far as the safety procedures set by the US coastguard are concerned. They also meet the strict safety standards of ABYC. Some also face testing for MILSPEC in the areas of moisture, temperature and vibration. Extensive testing and exhaustive engineering skills are required to develop these heaters. Therefore, there are only few available brands.

Descriptions – precautionary measures are must to avoid disasters.

Sony Handycam HDR-CX550V : Uses Impressive Autofocus

Posted by Admin | Advance Technology | Tuesday 15 February 2011 5:59 am

Choosing a handycam is certainly tricky. You will find numerous models available in the market. There is one such model that is worth trying and is known as Sony Handycam HDR-CX550V. For video purposes geotagging may not be practical but is quite fun. The autofocus system works in a remarkable manner.

It fares well in the competition market. Some people find the interface quite complicated. It greatly helps in storing greater amount of video. Hard drive used here gives extra grip. The minimum shutter speed of it is 1/8 of a second. The maximum shutter speed of it is 1/1500 of a second.

The digital format for the video used here is AVCHD, MPEG-2. The analog format for the video used in it is NTSC. The white balance methods used here are custom, automatic and presets. The white balance presets are for both indoor and outdoor purposes.

Maintenance Of Air Conditioner

Posted by Admin | Advance Technology | Tuesday 18 May 2010 11:59 am

Air conditioners are a necessity in today’s time so they must be well maintained too by keeping proper check of their maintenance. With consistent usage of air conditioner, the cooling starts to get affected because of the continuous use. The frequency of cleaning should be more in summers and once the season for air conditioners is off then it should be cleaned and then packed up till next season. This is the most effective method for the durability of the air conditioner.

Once installed, always take the warranty for sure with you. This warranty would help to get you out of any trouble within the warranty period. Cleaning the air conditioner would help you to get rid of the excess dirt that might accumulate if the air conditioner is not well cleaned. All that is required is the removal of the filter in order to start the cleaning process.

Then either brush or sprinkle some water on it. Remove all the excess dust particles, get it well cleaned, and then reverse the process. This is very important because it is actually machinery and with excessive use it tends to get dirty. Therefore its cleaning is equally important too. The manufacturers in competition try to improve their service at their level best. Even then there remains certain feature that distinguishes one company from the other. Therefore always read reviews of the company air conditioners before making the final decision as they are the users of the air conditioner.